OEM / ODM export factory · Luoyang, China

Insulated thermostatic enclosures that your shelves sell.

Double-wall PVC or panoramic glass, nine standard sizes, heated or unheated — all built to ship flat. Powder-coated wire bird cages ship beside them. Thirty export markets, from twenty pieces, with an EU responsible person in Paris.

20 pcs
MOQ per model
30+
Countries
5
In-house stages
476
Units / 40HQlargest PVC box · theoretical
A wall of white thermostatic enclosures, six high and four across, every cell lit and stocked with live reptiles
As installed

A wall of them, stocked and running

Six high, four across, every cell on its own controller with the lamps on. This is the flat-packed shell after it is built up and loaded — the photo a dealer sends back when the first container is gone.

Black insulated thermostatic enclosure with the glass front on, two digital controllers reading 20.1 and 22.0, three heat lamps running
Thermostatic enclosure · lamps running, both controllers live
01 / THERMOSTATIC ENCLOSURES

Insulated thermostatic enclosures

Nine sizes from 40 to 120 cm — unheated, single-zone or dual-zone — plus a three-size panoramic glass line. Insulated PVC panels, sliding tempered glass, flat-packed.

Explore the line
02 / BIRD CAGES

Steel wire bird cages

Desktop models to full flight cages. Pull-out trays, caster stands, safety latches. Thirteen export models in regular production.

Explore the line
Lead line · the thermostatic range

Two thermostatic lines, one build

The PVC thermostatic box leads: nine sizes, unheated, single-zone or dual-zone, all flat-packing into a carton under 16 cm deep. The panoramic glass line sits beside it in three sizes, glazed on the front and both ends. Bird cages are further down this page — jump to them.

01 / PRODUCTS
White panoramic thermostatic enclosure, glass front and both sides

Panoramic glass enclosure

3 sizes · glazed on both sides

Standard thermostat, or full smart

02 / Panoramic glass line

Glass on both ends, not just the front

Three sizes — 60, 80 and 100 cm — where the two end panels are glazed as well. It is the version a shop wants for a window or a middle-of-the-floor run, because the enclosure reads from either side instead of only head-on.

02 / GLASS
White panoramic thermostatic enclosure, glass front and both side panels, two lamp sockets visible inside
White shell · front and both sides glazed
Black panoramic thermostatic enclosure running with three lamps, controller display showing 26.6
Black shell · lamps running, display at 26.6
Three E27 ceramic lamp sockets mounted on the aluminium control rail, wired back to the controller
Lamp rail · three E27 sockets, wired back to the controller
White panoramic enclosure with the UVB lamp running, glass front and both sides
UVB running · light to both ends
Angled view of the white panoramic enclosure showing the glazed end panel
End panel · glazed, not solid
Panoramic enclosure flat-packed with the pre-wired rail, sockets and hardware
Flat-packed · rail pre-wired

Standard thermostat, or full smart

The glass shell is built on the same knock-down panel system as the PVC line, so the cartons, the hardware bag and the assembly method are identical. What differs is the two end panels, and the weight that comes with them: 12 kg at 60 cm, 15 kg at 80, 20 kg at 100.

The full-smart build puts timer switching, a timed UVB channel and a timed exhaust fan on the same rail, so the enclosure still leaves the factory with a single power cord instead of four plugs.

Full glass specification — 3 sizes
3sizes
60 × 40 × 40, 80 × 40 × 40 and 100 × 50 × 50 cm, all on the shared 15 cm flat-pack carton. Glass weighs more than the PVC equivalent — 12, 15 and 20 kg per carton — on the same CBM.

Glass insulates worse than the PVC sandwich panel, and we would rather say so: if the box has to hold a set point through a cold room, the solid PVC wall is the better buy. The glass line exists for visibility — a shop that needs the animal seen from the aisle.

From the line

Edge banding, bench assembly, loading

Three stills from our own workshop and loading bay. The edge bander welds the PVC strip to the panel, the shell is wired on the bench, and the cartons go up by hand.

02a / FROM THE LINE
Worker feeding a panel through the edge banding machine, PVC strip welded to the edge
Edge banding · PVC strip welded to the panel
White enclosure shell standing open on the assembly bench
Bench · shell open before wiring
Cartons passed up by hand onto a flatbed truck
Loading · cartons passed up by hand
In place

On a dealer shelf, and in a living room

The same shell in a living room, on a retail floor, and planted up as a stocked wall. Both ends are glass, so the animal is visible from the side aisle as well as the front — which is what sells it off a shelf.

03 / IN PLACE
A white long-haired cat looking into a lit enclosure at home, thermostat reading 24.6
At home · the animal is the display
Thermostatic enclosure standing on a white plinth in a reptile shop, lit from inside
Retail floor · glazed on both ends
Thermostatic enclosure placed on a wooden sideboard in a living room
Living room · sideboard height
A wall of lit enclosures planted up and running in a shop
Planted wall · the same shell, stacked
Two pages buyers ask for

Packing, and how it looks on a shelf

Loading is where most quotes fall over, and display is where most products stop selling. Both are on their own pages, with our own photographs rather than stock.

04 / MORE
Cartons passed up by hand onto a flatbed truck at the loading bay

Packing & loading

15–16 cm cartons · 476 per 40HQ

Two loading stills, and what is in the box

A wall of lit white enclosures in a shop

In the shop

Glazed both ends · 9 sizes

Why a wall of boxes sells, or does not

Enclosures on a shop rack with plants inside

Media

Photos of the line, the shop and the loading bay

Everything we have photographed, in one place

Packing data

Flat-pack is the whole point

Every model ships disassembled. One carton instead of one assembled cage means a fraction of the CBM — and a fraction of your ocean freight per unit. The table below covers the PVC enclosure line; bird cage cartons are confirmed per model.

05 / SPECS
PVC enclosure sizes and packing data. Custom sizes from 100 pcs. All sizes are outer dimensions in cm.
Outer size L×W×H (cm) Carton size (cm) Gross weight CBM / carton 40HQ — theoretical
40×30×3045×15×354 kg0.0236≈ 2,924 pcs
50×30×3055×15×355 kg0.0289≈ 2,448 pcs
60×40×4065×15×459 kg0.0439≈ 1,547 pcs
80×40×4085×15×4511 kg0.0574≈ 1,190 pcs
80×50×5085×15×5514 kg0.0701≈ 952 pcs
100×40×40105×15×4514 kg0.0709≈ 969 pcs
100×50×50105×15×5517 kg0.0866≈ 748 pcs
120×50×50125×15×5520 kg0.1031≈ 663 pcs
120×60×60125×15×6522 kg0.1219≈ 476 pcs

How to read this: CBM is calculated from carton dimensions. Theoretical load is stacked from the carton: laid flat, the floor of a 40HQ (1203 × 235 cm) filled layer by layer under 269 cm of internal height, no pallets and no gaps. 20GP loads at roughly 40% of these figures. Mixed containers welcome.

Why flat pack changes your margin

An assembled 120×60×60 cage occupies over 0.43 m³ on the water. The same cage flat-packed occupies 0.12 m³. On a 40HQ that is roughly the difference between loading 157 units and 476 — the freight cost per unit falls by about two thirds before you touch the FOB price.

Assembly on arrival

Cages ship flat-packed with their fixings per carton. PVC enclosures need no silicone work on arrival — no sealing, no curing, the unit can be sold straight out of the box.

The factory

Five stages, all under one roof

Wire welding, powder coating, PVC cutting, glass assembly and flat-pack packing happen in our own workshop. No subcontracted steps between you and the finished carton.

06 / PROCESS
01

Wire welding and frame forming

Steel wire is cut, bent and welded into cage frames and door assemblies before the coating stage.

In-house
02

Powder coating

Electrostatic powder coating in standard or custom RAL colours, then oven-cured.

Colour to order
03

PVC panel cutting

PVC board is cut and edged for enclosure walls, floors and one-piece waterproof bases, with ventilation openings.

In-house
04

Glass assembly

Tempered glass sliding doors are fitted with runners and locks. Heated and lit versions are assembled on the same line, wired and checked before packing.

Electrified
05

Flat-pack packing

Parts are counted, protected and packed flat with fittings. Cartons are marked to your specification for LCL or FCL loading.

Export ready
Inside the workshop

Unedited stills from our own production floor — not stock photography.

Workshop floor with palletised flat-pack cartons
Workshop floor
Wire straightening and cutting machine
Wire straightening and cutting
Worker loading a wire panel onto the welding jig
Mesh loading
Operator feeding a panel into the edge banding machine, panels stacked at the infeed
Edge banding
The edge banding machine running a panel along the belt
PVC edge strip
Cutting head working on sheet metal
Metal cutting
Workers assembling and packing parts into cartons
Assembly and packing
Flat-pack cartons stacked ready for loading
Packed cartons
Forklift loading flat-pack cartons into a container
Container loading

Want to see a specific stage before you order? Ask for photos or a short video of the line during your model's production run.

Compliance

Documents that clear customs

Every shipment leaves with a packing list, commercial invoice and carton marking that match your customs entry. Incoterms and payment terms are written into the proforma invoice before production starts.

07 / DOCUMENTS
  • Registered addressA002, 1st Floor, Chuangtuo Cross-border E-commerce Operation Industrial Park, Jianxi District, Luoyang, Henan, China
  • Product testingHeated enclosures — EU LVD + EMC reports TCF-OY20260417-ER / -SR · US UL 499:2017 test report XH2606B002573GR · issued to our production partner, full copies on request
  • Packing docsPacking list, commercial invoice, carton marking
  • IncotermsEXW, FOB, CIF, DDP
  • PaymentT/T 30/70 · PayPal or Alipay for samples · L/C for large orders
  • ShippingLCL, FCL, DDP sea to door, air · your forwarder accepted

EU authorised representative

Appointed as our representative in the European Union under GPSR, and the contact point for EU market surveillance. The signed original is available on request.

  • RepresentativeTechnoVision Solutions SARL
  • Address60 rue Francois Ier, 75008 Paris, France
  • File no.ECREP2026SR11345
  • Valid30 October 2026 – 30 October 2027
  • EU rep emailinfo@tvs-rep.net
LUCID German packaging register certificate

German packaging register (LUCID)

DE4280075124905 — registered producer since Oct 2025. Verifiable at verpackungsregister.org.

Business licence of Luoyang Yuchen Trading Co., Ltd.

Business licence

Luoyang Yuchen Trading Co., Ltd. — unified social credit code 91410305MAENJ89QR, registered with the Luoyang Administration for Market Regulation. Verifiable at gsxt.gov.cn. Legal representative's name masked.

FAQ

Questions buyers ask first

08 / FAQ
What is your minimum order quantity?
20 pcs per model. Sample orders of 1–5 pcs can be arranged, with sample unit prices slightly higher than bulk.
How long is the lead time?
15–60 days depending on quantity and whether customisation is involved. In-stock models ship in 7–15 days.
Can you print our brand?
Yes. OEM/ODM covers custom colours, sizes, logo printing and packaging design. Private-label MOQ is generally 100 pcs.
What are the payment terms?
T/T 30% deposit, 70% against copy of B/L. PayPal or Alipay for sample orders. L/C accepted for large orders.
Which shipping methods do you support?
LCL, FCL, DDP sea freight to door, and air freight. If you have a nominated forwarder, we work with them directly.
What documents come with each shipment?
Packing list, commercial invoice and carton marking, prepared to match your customs entry. Test reports and the EU representative letter are sent on request.
Do you have an EU responsible person?
Yes. TechnoVision Solutions SARL, 60 rue Francois Ier, 75008 Paris, France, is appointed as our authorised representative under GPSR — file no. ECREP2026SR11345, valid 30 October 2026 to 30 October 2027.
Can you deliver DDP to Europe?
Yes — DDP sea freight to door is available alongside EXW, FOB and CIF. If you prefer to use your own forwarder, we load against their instructions.
Second line · Bird cages

Bird cages, on the same container

Welded and powder-coated in the same workshop, packed flat like the enclosures. A mixed order still fills one 40HQ, so a distributor can take two thermostatic sizes and two cage models on a single booking. MOQ 20 pcs per model.

09 / BIRD CAGES
B091 Double-deck steel bird cage with pull-out trays and castors

Double-deck bird cage

46×46×142 cm · 8.3 kg shipped

Two compartments, two full-height doors

M023 M023 large parrot cage with an open play top

Parrot cage with play top

Open play top · pull-out tray

Bird steps out onto a platform, not the floor

B18L B18L large parrot cage with a storage shelf and castors

Parrot cage with storage shelf

56×61×180 cm · stand included

Full-width shelf, four castors

Stackable foldable breeding cage with feeders

Stackable breeding cage

Folds flat · feeders included

For breeders running racks

Also available: decorative floor cages, double-deck parrot cages, wrought-iron dome cages, tall acrylic-front cages. See the bird cage line.

Get a price

Tell us the model, quantity and destination port

You will get an EXW or CIF quotation within 24 hours on business days. If you are not sure which model fits, send a photo of what you sell today and we will match it.

We reply within 24 hours on business days. Your details are used only to answer this enquiry.